Deeluxe Areth Rin Snowboard boot review

This is a review on the Deeluxe Areth Rin snowboard boot. Over the last few years I’ve tried on a lot of snowboard boots. Over the last 4 seasons I rode the Thirtytwo TM-3 and the Ride Fuse  putting in around 200 days per boot.

I am going to talk about those other boots at first and compare them a bit before getting into the Areth Rin. You’ll find a bunch of pictures and a video on the Areth towards the end of this article.

Deeluxe Areth Rin snowboard boot

But all those days on those boots weren’t comfortable days. Lots of pain and discomfort. Lots of modifications and with each of those boots and I bought different sizes. With the TM-3 I got the 9’s at first they loosened up and then I got the 8.5’s.

With the Fuse’s I bought an 8.5 first and they were too big so I sent those back and got the 8’s and rode those for a while and then decided they were too big and got the 7.5’s which were better volume fitting but ultimately too short on my left foot.

Whatever boots you get know they will loosen up

After a couple of days or a week or more they will loosen up so whatever they feel like on day one won’t be how they feel on day 20, 30, 50, etc.

So the natural inclination is to buy them too big since they only expand after you get them, but you can buy them too small too. Or sometimes they are right on one foot or in some areas but not in the other.

I was tired of pain so last season 2025 I went out shopping again for boots tried on a bunch and found the Deeluxe Areth Rin to be the most comfortable.

But it’s always a challenge for me since I have skinny ankles and two different sized feet and one is more flat than the other.

This boot has been sitting in a box though…

The Ride Fuse is a relatively low volume boot. And I would say that is true of Ride/K2 boots (owned by same company) in general and probably Salomon too.

Thirtytwo boots are not usually low volume. Although the new Grenier boot looks lower volume. But the TM-3’s I had were a heavy duty boot and same with the popular TM-2’s.

Are Deeluxe boots low volume?

No, I would not say these are low volume. They are kind of bulky and that’s why I haven’t taken these out on the snow. Despite being more comfortable wearing around the house they are relatively bulky so my fear is after I wear these for a week or so then they will loosen up a bunch and then I will have to fill that space with another insole and patches of foam here in there.

Deeluxe boots in the box

Why did I buy the boot?

It’s a lace hybrid boot with a BOA. Which is what I like and it was comfortable. I like the simple look too. I think it’s a nice looking boot too. It’s quite a bit softer of a boot compared to the Ride Fuse which is rated an 8 in flex. The Areth Rin is rated a 3 I think which sounds way too soft but it you can get a tongue stiffener to raise that 2-3 points which sounded good.

The liner is a little flimsy looking. I kinda didn’t like the straight back of it or the shell. The Ride Fuse liner/shell is better molded and I liked the look of the wrap liner at first, but it added pressure points and little bruises on the top of my shins. It didn’t really flex naturally so I wouldn’t use that type of liner again.

So am I going to take these Deeluxe boots out of the box? IDK. I might so leave a comment if you’re interested and I can give you an update.

I put them on Ebay if you are interested they are a size 8.

Deeluxe Areth Rin back – note the straight back
Deeluxe Areth power straps w/ cushy looking liners
Street skate style soles which are probably good for board feel and they are rubber which is good, but not a lot of tread if you are hiking around
Deeluxe Areth inside view with power strap
Deeluxe Areth side view with the BOA

Deeluxe says:

Whether it’s a crisp method, a fresh pow slash, or a creative line through the trees, the best riding comes from the soul. United by this belief, DEELUXE and AREth have teamed up to create the
AREth Rin. Armed with a classic appearance, it pairs clean design with rich materials and sophisticated technology.

And thanks to its ability to ride any terrain, it’s Kazu Kokubo’s boot of choice. Combining the best of both worlds, its traditional laces offer a timeless look and familiar feel while the boot’s BOA® Fit System allows you to quickly and effortlessly secure your ankle and heel. A rugged leather patch in the ankle zone enhances comfort and durability while further securing your foot.

The boot’s Stage 3 liner provides a truly custom fit while its Skate Flex sole offers unsurpassed boardfeel. Inspired by the boot’s refined design and impressive performance, Japan’s Freerun magazine recently honored the AREth Rin as one of the top picks in the freeride category of its Best Gear Awards. If your riding comes from within, consider the AREth Rin your soulmate.

Related snowboard boots reviews:

Bent Metal Axtion Binding Review

This will be a review of the Bent Metal Axtion snowboard binding review. I rode this in the 2024/2025 season on a Lib Tech TRS. These bindings are made by Bent Metal which is owned by Mervin manufacturing the maker of Gnu and Lib Tech snowboards.

These are a simple functional binding. I had virtually no problems with this binding except for a while one of the toe strap ratchets was funky sometimes it would get stuck when I would try to loosen it, however I mentioned this to Mervin and they sent me a replacement pair which I never ended up using. The problem went away or I just dealt with it.

Compared to the Union Force bindings which I previously had the Axtion have a smaller (more narrow) foot plate which was better. Both the Strata and Force had empty space on the side of the boot more so near the toes. The Force had a toe strap that would slip off sometimes for whatever reason.

I had the medium sized Axtion bindings and medium sized Force bindings but the Force had more empty space on the sides of the boot when I was in the binding. I had sized down all the way to a 7.5 Ride Fuse boot and previously was on 8.5 Thirtytwo Tm-3 boots so in theory I could have ridden small sized bindings, but…

Before buying the Axtion I bought the Transfer in a small and I never rode them. But my size 7.5 looked doable but on the edge of being too big for the small binding so I returned them. If I remember right size 6-8 is a small binding and 8-10 is medium and 10+ is large.

What I liked about the Aktion…

No tool forward lean adjuster

They just worked. I liked the color of the orange black binding kinda like the old Strata’s. I liked the highback shape. I like the forward lean adjuster that you can do without a tool. Although I never experimented with a different flexing drive plate I like how you can pop them on and off easy.

Drive plate and base plate

The base plate of the Axtion looks better than the old Force ones I had. The Axtion has some kind of rubbery material below the plastic between the bidning and board and the plastic has holes in it probably to reduce weight. The Force had neither. The Force was just plastic on the board which would leave marks when you took them off.

I liked the heel straps on the binding as they seemed more form fitting than my previous ones. They seemed comfortable enough.

And I also like Mervin.

What I didn’t like about the Axtion…

Not much… pretty happy with them but if I was to nit pick I think they could use some stainless steel fasteners on the straps. I believe the ones they use are cheaper looking zinc coated ones. Mine have not rusted, but if those are zinc then they will rust eventually.

And one of the straps on my toes get’s kinda stuck sometimes. Either I got used to it or that problem went away can’t remember.

But overall they were good and I would ride them again. I am also curious about the Transfer too.

Check out the Bent Metal Axtion binding on Evo.com.

Related: